Trouble-free Installation Methods for a New Shower Unit

Contact Us Now

Have you been looking for tips about Simple ways to Install a Shower Cubicle on Your Own?

A successful shower installation needs careful preparation and also a lot of job. Most of the times, you will certainly need to do 3 types of jobs: mounting walls, setting up the plumbing, and also finishing wall surfaces.

Prep work

Firstly, you need to decide on the kind of shower that you desire to install. It is very important to identify whether the picked shower is capable of managing certain systems and can control a secure degree of water through the boiler. Many shower systems nowadays are made to be flexible to different water pressures (such as kept warm water and also cold keys).
It is also essential to take into consideration the water stress and also the preparation of the piping and drainage for the shower

Different Kinds Of Shower Units

Push-on Mixer: The hose and spray parts of the push-on mixer shower system can be linked to the bathroom faucet according to your need, and also the water temperature level can be changed by means of the faucets. Push-on mixers are cheap as well as very basic to mount. Nonetheless, although the tube link is basic, it is quickly removed. Furthermore, it is troublesome to change the temperature.

Bath/Shower Mixer: The hose pipe and spray of this type of shower are combined with a bathroom mixer faucet, as well as the temperature can be adjusted through the bath faucets. It is a really economical choice and no extra plumbing is involved. Nonetheless, the bath/shower mixers additionally experience troublesome temperature control options.

Handbook Mixer: The hose pipe and spray of a hand-operated mixer shower device are a part of the wall device and also the hot and cold water supplies are linked to a single shutoff The temperature level and stress of the water are managed through either one or a variety of handles (in much more expensive showers). Although temperature level control is a lot easier in hand-operated mixer kinds, they are extra expensive than the previously pointed out mixers. They also need extra plumbing of cold and hot water system pipes.

Thermostatic Mixer: The pipe as well as spray of this shower kind belong of the wall surface unit and also the hot and cold water products are linked to a single valve below too. It is full with an integrated stabiliser to self-adjust the water temperature and to stop it from becoming also hot. Among the most significant advantages of a thermostatic mixer shower kind includes hassle-free temperature control. Nonetheless, it is the most expensive of the different mixer alternatives.

Power Shower: A power shower is a single device consisting of a powerful electrical pump that can changing both the water stress and temperature. This sort of shower can be fitted if there is supply of water from a cold water tank as well as a warm water cylinder. A power shower makes the modification of both pressure as well as temperature level very easy. On the other hand, it is unsuitable for water heated up straight by the shower or where the water is supplied by a mix central heating boiler under mains pressure.

Electric Shower: An electrical shower is plumbed right into a mains cold water supply as well as it heats up the water electrically. It is very important to keep in mind that for this shower type to be set up, the keys stress needs to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The device allows the temperature level and also pressure to be changed by means of a handle. Versions with temperature stabilisers are better as they stay untouched by various other faucets elsewhere being used within the family. A significant downside of electrical showers is that the control handle just enables the alternative of heats at much less stress, or lower temperatures at a greater pressure. This is troublesome in the winter when the spray is often weak and the mains water is colder. Nevertheless, this issue is dealt with in some designs which are offered with a winter/summer setup.

Method

Relying on the sort of shower you desire to mount, the shower head need to either be suited order to avoid its contact with the water in the bath below or the base tray, or it should have a check shutoff.
Prior to starting, it is recommended to note the settings of the shower head and also control, and also to intend the pipe-work entailed. In addition, the drainage system to eliminate the waste water will require to be intended. Both settings of the cable route and the shower button will certainly likewise need to be considered if an instantaneous or electrical shower system is being installed.
Use the instruction guide given with the shower device to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is important to cut off the water supply. In order to secure the pipelines, they need to be given a water resistant covering and likewise fitted with separating valves. The pipes can after that be hidden right into the wall and glued over to neaten the total appearance.
Fit the base tray, shower head, as well as fittings.
Link the major shower control to the pipes that will certainly be supplying the water (This may call for a female screw string adapter).
Reconnect the supply of water and also test the pipelines for any leakages, as some might require tightening up.
If you are setting up an electrical shower, keep in mind to switch off the power supply prior to making any kind of electric connections. As soon as these connections have actually been made (there should be advice within the instruction manual), the power supply can be switched over back on.

Changing Water Stress to Match Your Shower

The cold water tank can be lifted to a higher elevation (in some cases just 150mm (6inches)) by fitting a strong wood support under it - possibly made up of struts and also blockboards. If you select this alternative, the main and also distribution pipes will also need to be elevated to fulfill the brand-new elevation of the reservoir.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is chosen, it must be connected into the power supply in order to operate.

Piping as well as Drain

It is best to utilize 15mm diameter supply pipelines, as well as make the go to the shower as short as well as straight as possible so as to maintain maximum stress and minimise warmth loss. In addition, by reducing making use of elbow joints for pipe corners, you can decrease the resistance in the flow of the water. You can achieve this by bending the pipes instead.

A Lot Of Usual Blunders

Going against or ignoring local code limitations.

Utilizing pipes that are as well little.

Connecting copper to galvanized without utilizing a brass or dielectric suitable between the two.

Not utilizing tape or pipe compound at threaded joints.

Not leveling your fixtures when installing them.

Not installing an air gap filling for components.

Reducing supply stub outs as well brief to set up the shutoff valves onto after the completed wall is in place.

Not properly aligning tubes right into fittings or stop valves. (Forcing the nut onto the compression ring at an angle when the tubes goes to an angle will trigger a leak.).

When transforming the water back on in your house, always run the outside hose shutoff or purge your bathrooms to bleed dirt and also air from the lines. This particles can cause problems in your sink taps as well as other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I'm very inquisitive about How to Install a Freestand and I'm hoping you enjoyed reading our entry. Do you know about another person who is inquisitive about How to Install a Direct-to-Stud Shower Enclosure? Feel free to promote it. I truly appreciate reading our article about How to Install a One-Piece Shower Unit.

Book Service Now